If it still doesn't work, return to Step 2 and play with mixer settings. If there are other entries, repeat Step 3 with each parameter. Note the numbers in brackets ('' should be one of them that's the one we tried in Step 3 with the 'hw:0,2' parameter). If that doesn't work, look for entries listed as 'digital audio playback' in the output of 'cat /proc/asound/devices'. If it works your receiver should indicate it's getting PCM data. Try playing back a WAV file: 'aplay -D hw:0,2 myfile.wav' or possibly 'aplay -D plughw:0,2 myfile.wav'. Not sure what I need to do with the Ubuntu Config.Īlso, my card is: Turtle Beach TBS-3300-01 Montego DDL Sound Cardīasic troubleshooting steps (taken from the DigitalOut with ALSA page I posted to your earlier question):Ĭheck that the card is found and available (already done! good job!)Ĭheck mixer settings (try TonyUser's suggestion of gnome-volume-control-pulse first, then try running alsamixer and seeing if you need to adjust things there as well). If I uninstall pulse, it works okay for XMBC, but nothing else has sound. I don't really know very much about sound trouble shooting, so any help is appreciated.

I disable the onboard intel audio from the bios.Īplay -l says: **** List of PLAYBACK Hardware Devices ****Ĭard 0: CMI8768, device 0: CMI8738-MC8 Ĭard 0: CMI8768, device 1: CMI8738-MC8 Ĭard 0: CMI8768, device 2: CMI8738-MC8 Ĭurrently I have the following switches checked:

When sound does come out those two channels, my reciever says PCM, but when the test says other channels, it says NO AUDIO INPUT. I can get static out the front two channels with the following command but that is it so far (when the test says center, nothing works): I installed a new sound card, a Turtle Beach card, and can't seem to get sound out of the optical out.

Turtle beach montego ddl pci drivers